Difference between revisions of "DSi XL testpoints"
Jump to navigation
Jump to search
(→UTL-SUB-01 testpoints: oops fix stuff) |
m (fix TP169 colspan) |
||
(19 intermediate revisions by the same user not shown) | |||
Line 6: | Line 6: | ||
! number | ! number | ||
! name (TWL testpoint) | ! name (TWL testpoint) | ||
+ | ! short name (some TWL PCBs) | ||
! voltage standard | ! voltage standard | ||
! comment | ! comment | ||
Line 11: | Line 12: | ||
| TP1 | | TP1 | ||
| EXTB+ | | EXTB+ | ||
+ | | EXB+ | ||
| ? | | ? | ||
| | | | ||
Line 16: | Line 18: | ||
| TP2 | | TP2 | ||
| VIN | | VIN | ||
− | | | + | | |
+ | | ≃5V DC | ||
| External charger power input | | External charger power input | ||
|- | |- | ||
| TP3 | | TP3 | ||
| Rosc | | Rosc | ||
+ | | | ||
| ? | | ? | ||
| ? | | ? | ||
|- | |- | ||
| TP4 | | TP4 | ||
− | | RICHG | + | | RICHG |
+ | | RCG | ||
| ? | | ? | ||
| Recharge? | | Recharge? | ||
Line 31: | Line 36: | ||
| TP5 | | TP5 | ||
| GND | | GND | ||
− | | | + | | GND |
− | | ground (near external charger connector) | + | | ground |
+ | | (near external charger connector) | ||
|- | |- | ||
| TP6 | | TP6 | ||
+ | | VDD12 | ||
| V12 | | V12 | ||
| 1.2V power rail | | 1.2V power rail | ||
Line 41: | Line 48: | ||
| TP7 | | TP7 | ||
| BT+ | | BT+ | ||
+ | | | ||
| battery + | | battery + | ||
| at 2-pin power connector to UTL-SUB-01 | | at 2-pin power connector to UTL-SUB-01 | ||
Line 46: | Line 54: | ||
| TP8 | | TP8 | ||
| VDET- | | VDET- | ||
+ | | VDT- | ||
| ? | | ? | ||
| ? | | ? | ||
Line 51: | Line 60: | ||
| TP9 | | TP9 | ||
| DET | | DET | ||
+ | | DT | ||
| ? | | ? | ||
| ? | | ? | ||
|- | |- | ||
| TP10 | | TP10 | ||
+ | | VDD18 | ||
| V18 | | V18 | ||
| 1.8V power rail | | 1.8V power rail | ||
Line 61: | Line 72: | ||
| TP11 | | TP11 | ||
| ? | | ? | ||
+ | | | ||
| ? | | ? | ||
| something charging? | | something charging? | ||
|- | |- | ||
| TP12 | | TP12 | ||
− | | VDD10 | + | | VDD10 |
+ | | V10 | ||
| 10V power rail | | 10V power rail | ||
| For LCDs | | For LCDs | ||
|- | |- | ||
| TP13 | | TP13 | ||
+ | | VDD33 | ||
| V33 | | V33 | ||
| 3.3V power rail | | 3.3V power rail | ||
Line 76: | Line 90: | ||
| TP14 | | TP14 | ||
| GND | | GND | ||
− | | | + | | GND |
− | | ground (near PMIC) | + | | ground |
+ | | (near PMIC) | ||
|- | |- | ||
| TP15 | | TP15 | ||
| B+ | | B+ | ||
+ | | | ||
| ? | | ? | ||
| battery + ? | | battery + ? | ||
|- | |- | ||
| TP16 | | TP16 | ||
− | | VDD-5 | + | | VDD-5 |
+ | | V-5 | ||
| -5V power rail | | -5V power rail | ||
| For LCDs | | For LCDs | ||
Line 91: | Line 108: | ||
| TP17 | | TP17 | ||
| PVDD | | PVDD | ||
+ | | PVD | ||
| ? | | ? | ||
| ? | | ? | ||
|- | |- | ||
| TP18 | | TP18 | ||
− | | VDD5 | + | | VDD5 |
− | | | + | | V5 |
+ | | 5.0V power rail | ||
| For LCDs | | For LCDs | ||
|- | |- | ||
| TP19 | | TP19 | ||
+ | | SG? | ||
+ | | | ||
| ? | | ? | ||
| ? | | ? | ||
− | |||
|- | |- | ||
| TP20 | | TP20 | ||
− | | BLA1 | + | | BLA1 |
− | | | + | | BA1 |
| ? | | ? | ||
+ | | backlight anode for lower screen | ||
|- | |- | ||
| TP21 | | TP21 | ||
− | | ? | + | | VDD42? |
− | | ? | + | | V42? |
− | | (to D6) | + | | 4.2V? power rail (it's certainly a power rail) |
+ | | generated from VDD5 using diode voltage drops? (to D6, C22, D3) | ||
|- | |- | ||
| TP22 | | TP22 | ||
− | | | + | | BLC1 |
+ | | BC1 | ||
| ? | | ? | ||
− | | | + | | backlight cathode for lower screen |
|- | |- | ||
| TP23 | | TP23 | ||
− | | BLA2 | + | | BLA2 |
− | | | + | | BA2 |
| ? | | ? | ||
+ | | backlight anode for upper screen | ||
|- | |- | ||
− | ! scope="row" colspan=" | + | ! scope="row" colspan="5" | (TP24, TP25 don't exist) |
|- | |- | ||
| TP26 | | TP26 | ||
| BLC2 | | BLC2 | ||
+ | | BC2 | ||
| ? | | ? | ||
− | | | + | | backlight cathode for upper screen |
|- | |- | ||
− | ! scope="row" colspan=" | + | ! scope="row" colspan="5" | (TP27 doesn't exist) |
|- | |- | ||
| TP28 | | TP28 | ||
− | | | + | | MIC- |
− | | | + | | |
− | | | + | | ground |
+ | | same net as (analog) ground | ||
|- | |- | ||
| TP29 | | TP29 | ||
− | | | + | | MIC+ |
− | | | + | | |
− | | | + | | analog |
+ | | Analog microphone-in signal | ||
|- | |- | ||
| TP30 | | TP30 | ||
| SPRP | | SPRP | ||
+ | | | ||
| analog | | analog | ||
| positive signal for right built-in speaker | | positive signal for right built-in speaker | ||
Line 150: | Line 178: | ||
| TP31 | | TP31 | ||
| SPRN | | SPRN | ||
+ | | | ||
| analog | | analog | ||
| negative signal for right built-in speaker | | negative signal for right built-in speaker | ||
Line 155: | Line 184: | ||
| TP32 | | TP32 | ||
| SPLP | | SPLP | ||
+ | | | ||
| analog | | analog | ||
| positive signal for left built-in speaker | | positive signal for left built-in speaker | ||
Line 160: | Line 190: | ||
| TP33 | | TP33 | ||
| SPLN | | SPLN | ||
+ | | | ||
| analog | | analog | ||
| negative signal for left built-in speaker | | negative signal for left built-in speaker | ||
Line 165: | Line 196: | ||
| TP34 | | TP34 | ||
| GND | | GND | ||
− | | | + | | GND |
+ | | ground | ||
| probably analog ground | | probably analog ground | ||
|- | |- | ||
| TP35 | | TP35 | ||
| SR | | SR | ||
+ | | | ||
| analog | | analog | ||
| headphone tip | | headphone tip | ||
Line 175: | Line 208: | ||
| TP36 | | TP36 | ||
| SL | | SL | ||
+ | | | ||
| analog | | analog | ||
| headphone ring | | headphone ring | ||
|- | |- | ||
− | ! scope="row" colspan=" | + | ! scope="row" colspan="5" | (TP37, TP38 don't exist) |
|- | |- | ||
| TP39 | | TP39 | ||
| ORANGE | | ORANGE | ||
− | | 3V3? | + | | ORG |
+ | | 3V3? 4V2? (at anode) | ||
| Orange LED charging indicator | | Orange LED charging indicator | ||
|- | |- | ||
| TP40 | | TP40 | ||
| BLUE | | BLUE | ||
− | | 3V3? | + | | BLE |
+ | | 3V3? 4V2? (at anode) | ||
| Blue LED power good indicator | | Blue LED power good indicator | ||
|- | |- | ||
| TP41 | | TP41 | ||
| RED | | RED | ||
− | | | + | | |
+ | | open collector (connected to LED cathode) | ||
| Red LED battery low indicator | | Red LED battery low indicator | ||
|- | |- | ||
| TP42 | | TP42 | ||
− | | | + | | MC1_IO7 |
+ | | M1_7 | ||
| 3V3 | | 3V3 | ||
| MSB of gamecard parallell ROM *or* AUXSPI COPI signal | | MSB of gamecard parallell ROM *or* AUXSPI COPI signal | ||
|- | |- | ||
| TP43 | | TP43 | ||
− | | | + | | MC1_IO6 |
+ | | M1_6 | ||
| 3V3 | | 3V3 | ||
| 6th bit of gamecard parallell ROM *or* AUXSPI CIPO signal | | 6th bit of gamecard parallell ROM *or* AUXSPI CIPO signal | ||
Line 207: | Line 246: | ||
| TP44 | | TP44 | ||
| MC1_VCC | | MC1_VCC | ||
+ | | M1_V | ||
| 3.3V power | | 3.3V power | ||
| power supply to gamecard (can be switched off by SoC) | | power supply to gamecard (can be switched off by SoC) | ||
|- | |- | ||
− | ! scope="row" colspan=" | + | ! scope="row" colspan="5" | (TP45 doesn't exist) |
|- | |- | ||
| TP46 | | TP46 | ||
− | | | + | | MC1_IO5 |
+ | | M1_5 | ||
| 3V3 | | 3V3 | ||
| | | | ||
|- | |- | ||
| TP47 | | TP47 | ||
− | | | + | | MC1_IO4 |
+ | | M1_4 | ||
| 3V3 | | 3V3 | ||
| | | | ||
|- | |- | ||
| TP48 | | TP48 | ||
− | | | + | | MC1_IO3 |
+ | | M1_3 | ||
| 3V3 | | 3V3 | ||
| | | | ||
Line 229: | Line 272: | ||
| TP49 | | TP49 | ||
| MC1_DET | | MC1_DET | ||
+ | | M1_DT | ||
| 3V3 | | 3V3 | ||
| Cartridge detected in slot (active-low) | | Cartridge detected in slot (active-low) | ||
|- | |- | ||
| TP50 | | TP50 | ||
− | | | + | | MC1_IO2 |
+ | | M1_2 | ||
| 3V3 | | 3V3 | ||
| | | | ||
Line 239: | Line 284: | ||
| TP51 | | TP51 | ||
| MC1_IREQ | | MC1_IREQ | ||
+ | | M1_IRQ | ||
| 3V3 | | 3V3 | ||
| gamecart->SoC IRQ | | gamecart->SoC IRQ | ||
|- | |- | ||
| TP52 | | TP52 | ||
− | | | + | | MC1_IO1 |
+ | | M1_1 | ||
| 3V3 | | 3V3 | ||
| | | | ||
Line 249: | Line 296: | ||
| TP53 | | TP53 | ||
| MC1_RES | | MC1_RES | ||
+ | | M1_RES | ||
| 3V3 | | 3V3 | ||
| SoC->gamecart reset signal | | SoC->gamecart reset signal | ||
|- | |- | ||
| TP54 | | TP54 | ||
− | | | + | | MC1_IO0 |
+ | | M1_0 | ||
| 3V3 | | 3V3 | ||
| | | | ||
Line 259: | Line 308: | ||
| TP55 | | TP55 | ||
| MC1_CS | | MC1_CS | ||
+ | | M1_CS | ||
| 3V3 | | 3V3 | ||
| parallell ROM select (active-low) | | parallell ROM select (active-low) | ||
Line 264: | Line 314: | ||
| TP56 | | TP56 | ||
| MC1_CLK | | MC1_CLK | ||
+ | | M1_CLK | ||
| 3V3 | | 3V3 | ||
| | | | ||
Line 269: | Line 320: | ||
| TP57 | | TP57 | ||
| MC1_CS2 | | MC1_CS2 | ||
+ | | M1_CS2 | ||
| 3V3 | | 3V3 | ||
| AUXSPI select (active-low) | | AUXSPI select (active-low) | ||
|- | |- | ||
| TP58 | | TP58 | ||
− | | mRST | + | | /mRST |
+ | | | ||
| 3V3 | | 3V3 | ||
− | | | + | | BPTWL reset (active-low) |
|- | |- | ||
| TP59 | | TP59 | ||
| mFE | | mFE | ||
+ | | | ||
+ | | 3V3 | ||
+ | | BPTWL flash enable (cf. 78K0/Kx2 Serial Flash Programming protocol, see NEC/Renesas docs) | ||
+ | |- | ||
+ | | TP60 | ||
+ | | VOLP | ||
+ | | VLP | ||
+ | | 3V3 | ||
+ | | volume + button (also RxD6 for 78K0 SFP. There's a series resistor to the physical button as protection against shorts) | ||
+ | |- | ||
+ | | TP61 | ||
+ | | VOLN | ||
+ | | VLN | ||
+ | | 3V3 | ||
+ | | volume - button (also TxD6 for 78K0 SFP. There's a series resistor to the physical button as protection against shorts) | ||
+ | |- | ||
+ | | TP62 | ||
+ | | ATH_TX_H | ||
+ | | A_T_H | ||
+ | | 3V3 | ||
+ | | AR6002 ANTD, "Control signal for shared antenna switch", probably enables Ath TX antenna | ||
+ | |- | ||
+ | | TP63 | ||
+ | | WL_TXPE | ||
+ | | WL_T | ||
+ | | 3V3 | ||
+ | | Old Wifi TX enable? | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP64 doesn't exist) | ||
+ | |- | ||
+ | | TP65 | ||
+ | | WL_RXPE | ||
+ | | WL_R | ||
+ | | 3V3 | ||
+ | | Old Wifi RX enable? | ||
+ | |- | ||
+ | | TP66 | ||
+ | | /WIFI_RST | ||
+ | | /WF_RST | ||
+ | | 3V3 | ||
+ | | New WiFi (Ath6k) reset (active-low) | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP67, TP68 don't exist) | ||
+ | |- | ||
+ | | TP69 | ||
+ | | SPI_MOSI | ||
+ | | | ||
+ | | 3V3 | ||
+ | | SPI bus | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP70 doesn't exist) | ||
+ | |- | ||
+ | | TP71 | ||
+ | | SPI_MISO | ||
+ | | | ||
+ | | 3V3 | ||
+ | | SPI bus | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP72 doesn't exist) | ||
+ | |- | ||
+ | | TP73 | ||
+ | | SPI_SCK | ||
+ | | SPI_SK | ||
+ | | 3V3 | ||
+ | | SPI bus | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP74, TP75 don't exist) | ||
+ | |- | ||
+ | | TP76 | ||
+ | | SPI_CS1 | ||
+ | | SPI_C1 | ||
+ | | 3V3 | ||
+ | | SPI chip select 1 (PMIC) | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP77 doesn't exist) | ||
+ | |- | ||
+ | | TP78 | ||
+ | | SPI_CS3 | ||
+ | | SPI_C3 | ||
+ | | 3V3 | ||
+ | | SPI chip select 3 (TSC) | ||
+ | |- | ||
+ | | TP79 | ||
+ | | SPI_CS2 | ||
+ | | SPI_C2 | ||
+ | | 3V3 | ||
+ | | SPI chip select 2 ([[NVRAM]]) | ||
+ | |- | ||
+ | | TP80 | ||
+ | | SCL | ||
+ | | | ||
+ | | 1V8 | ||
+ | | CPU-TWL bus | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP81 doesn't exist) | ||
+ | |- | ||
+ | | TP82 | ||
+ | | SDA | ||
+ | | | ||
+ | | 1V8 | ||
+ | | CPU-TWL bus | ||
+ | |- | ||
+ | | TP83 | ||
+ | | PENIRQ | ||
+ | | PNIRQ | ||
+ | | 1V8? 3V3? | ||
+ | | touchscreen pen down | ||
+ | |- | ||
+ | | TP84 | ||
+ | | R7 | ||
+ | | | ||
+ | | 1V8? | ||
+ | | hinge magnet detect signal (active-low) | ||
+ | |- | ||
+ | | TP85 | ||
+ | | RESET | ||
+ | | RST | ||
+ | | 3V3, but use as open drain/collector | ||
+ | | CPU-TWL reset signal | ||
+ | |- | ||
+ | | TP86 | ||
+ | | P05 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | dpad left button | ||
+ | |- | ||
+ | | TP87 | ||
+ | | P04 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | dpad right button | ||
+ | |- | ||
+ | | TP88 | ||
+ | | P03 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | start button | ||
+ | |- | ||
+ | | TP89 | ||
+ | | P02 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | select button | ||
+ | |- | ||
+ | | TP90 | ||
+ | | P01 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | B button | ||
+ | |- | ||
+ | | TP91 | ||
+ | | P00 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | A button | ||
+ | |- | ||
+ | | TP92 | ||
+ | | PM_SLP | ||
+ | | | ||
+ | | ? | ||
+ | | ? | ||
+ | |- | ||
+ | | TP93 | ||
+ | | VCNT5 | ||
+ | | | ||
+ | | ? | ||
+ | | ? | ||
+ | |- | ||
+ | | TP94 | ||
+ | | GPIO330? | ||
+ | | 330? | ||
+ | | 3V3 | ||
+ | | GPIO debug testpoint | ||
+ | |- | ||
+ | | TP95 | ||
+ | | R01 | ||
+ | | | ||
+ | | ? | ||
+ | | Y button | ||
+ | |- | ||
+ | | TP96 | ||
+ | | R00 | ||
+ | | | ||
+ | | ? | ||
+ | | X button | ||
+ | |- | ||
+ | | TP97 | ||
+ | | P09 | ||
+ | | | ||
+ | | 3V3 | ||
+ | | shoulder-L button | ||
+ | |- | ||
+ | | TP98 | ||
+ | | P08 | ||
+ | | | ||
+ | | 3V3 | ||
+ | | shoulder-R button | ||
+ | |- | ||
+ | | TP99 | ||
+ | | MUTE | ||
+ | | | ||
+ | | 3V3 | ||
+ | | ? (controlled by GPIO333 through U17) | ||
+ | |- | ||
+ | | TP100 | ||
+ | | P07 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | dpad down button | ||
+ | |- | ||
+ | | TP101 | ||
+ | | HP#SP | ||
+ | | H#S | ||
+ | | 3V3 | ||
+ | | audio out is headphones (1) or speakers (0). aka GPIO331 | ||
+ | |- | ||
+ | | TP102 | ||
+ | | P06 | ||
+ | | | ||
+ | | 3V3? | ||
+ | | dpad up button | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP103 doesn't exist) | ||
+ | |- | ||
+ | | TP104 | ||
+ | | /IRQ_O? | ||
+ | | | ||
+ | | 3V3 | ||
+ | | "powerbutton pressed" signal from the BPTWL to the CPU-TWL. aka GPIO332 | ||
+ | |- | ||
+ | | TP105 | ||
+ | | LDR20 | ||
+ | | LR20 | ||
+ | | | ||
+ | | top LCD R.bit0 | ||
+ | |- | ||
+ | | TP106 | ||
+ | | LDR21 | ||
+ | | LR21 | ||
+ | | | ||
+ | | top LCD R.bit1 | ||
+ | |- | ||
+ | | TP107 | ||
+ | | LDR22 | ||
+ | | LR22 | ||
+ | | | ||
+ | | top LCD R.bit2 | ||
+ | |- | ||
+ | | TP108 | ||
+ | | LDR23 | ||
+ | | LR23 | ||
+ | | | ||
+ | | top LCD R.bit3 | ||
+ | |- | ||
+ | | TP109 | ||
+ | | LDR24 | ||
+ | | LR24 | ||
+ | | | ||
+ | | top LCD R.bit4 | ||
+ | |- | ||
+ | | TP110 | ||
+ | | LDB21 | ||
+ | | LB21 | ||
+ | | | ||
+ | | top LCD B.bit1 | ||
+ | |- | ||
+ | | TP111 | ||
+ | | LDG21 | ||
+ | | LG21 | ||
+ | | | ||
+ | | top LCD G.bit1 | ||
+ | |- | ||
+ | | TP112 | ||
+ | | LDG22 | ||
+ | | LG22 | ||
+ | | | ||
+ | | top LCD G.bit2 | ||
+ | |- | ||
+ | | TP113 | ||
+ | | LDG25 | ||
+ | | LG25 | ||
+ | | | ||
+ | | top LCD G.bit5 | ||
+ | |- | ||
+ | | TP114 | ||
+ | | LDB20 | ||
+ | | LB20 | ||
+ | | | ||
+ | | top LCD B.bit0 | ||
+ | |- | ||
+ | | TP115 | ||
+ | | LDB23 | ||
+ | | LB23 | ||
+ | | | ||
+ | | top LCD B.bit3 | ||
+ | |- | ||
+ | | TP116 | ||
+ | | LDR11 | ||
+ | | LR11 | ||
+ | | | ||
+ | | bottom LCD R.bit1 | ||
+ | |- | ||
+ | | TP117 | ||
+ | | LDR12 | ||
+ | | LR12 | ||
+ | | | ||
+ | | bottom LCD R.bit4 | ||
+ | |- | ||
+ | | TP118 | ||
+ | | LDR15 | ||
+ | | LR15 | ||
+ | | | ||
+ | | bottom LCD R.bit5 | ||
+ | |- | ||
+ | | TP119 | ||
+ | | LDR25 | ||
+ | | LR25 | ||
+ | | | ||
+ | | top LCD R.bit5 | ||
+ | |- | ||
+ | | TP120 | ||
+ | | LDG20 | ||
+ | | LG20 | ||
+ | | | ||
+ | | top LCD G.bit2 | ||
+ | |- | ||
+ | | TP121 | ||
+ | | LDG23 | ||
+ | | LG23 | ||
+ | | | ||
+ | | top LCD G.bit3 | ||
+ | |- | ||
+ | | TP122 | ||
+ | | LDG24 | ||
+ | | LG24 | ||
+ | | | ||
+ | | top LCD G.bit4 | ||
+ | |- | ||
+ | | TP123 | ||
+ | | LDB22 | ||
+ | | LB22 | ||
+ | | | ||
+ | | top LCD B.bit2 | ||
+ | |- | ||
+ | | TP124 | ||
+ | | LDB24 | ||
+ | | LB24 | ||
+ | | | ||
+ | | top LCD B.bit4 | ||
+ | |- | ||
+ | | TP125 | ||
+ | | LDB25 | ||
+ | | LB25 | ||
+ | | | ||
+ | | top LCD B.bit5 | ||
+ | |- | ||
+ | | TP126 | ||
+ | | LDR10 | ||
+ | | LR10 | ||
+ | | | ||
+ | | bottom LCD R.bit0 | ||
+ | |- | ||
+ | | TP127 | ||
+ | | LDR13 | ||
+ | | LR13 | ||
+ | | | ||
+ | | bottom LCD R.bit3 | ||
+ | |- | ||
+ | | TP128 | ||
+ | | LDR14 | ||
+ | | LR14 | ||
+ | | | ||
+ | | bottom LCD R.bit4 | ||
+ | |- | ||
+ | | TP129 | ||
+ | | LDG10 | ||
+ | | LG10 | ||
+ | | | ||
+ | | bottom LCD G.bit0 | ||
+ | |- | ||
+ | | TP130 | ||
+ | | LDG11 | ||
+ | | LG11 | ||
+ | | | ||
+ | | bottom LCD G.bit1 | ||
+ | |- | ||
+ | | TP131 | ||
+ | | LDG12 | ||
+ | | LG12 | ||
+ | | | ||
+ | | bottom LCD G.bit2 | ||
+ | |- | ||
+ | | TP132 | ||
+ | | LDG13 | ||
+ | | LG13 | ||
+ | | | ||
+ | | bottom LCD G.bit3 | ||
+ | |- | ||
+ | | TP133 | ||
+ | | LDG15 | ||
+ | | LG15 | ||
+ | | | ||
+ | | bottom LCD G.bit5 | ||
+ | |- | ||
+ | | TP134 | ||
+ | | LDB11 | ||
+ | | LB11 | ||
+ | | | ||
+ | | bottom LCD B.bit1 | ||
+ | |- | ||
+ | | TP135 | ||
+ | | LDG14 | ||
+ | | LG14 | ||
+ | | | ||
+ | | bottom LCD G.bit4 | ||
+ | |- | ||
+ | | TP136 | ||
+ | | LDB10 | ||
+ | | LB10 | ||
+ | | | ||
+ | | bottom LCD B.bit0 | ||
+ | |- | ||
+ | | TP137 | ||
+ | | COM2 | ||
+ | | | ||
+ | | ? | ||
+ | | ? | ||
+ | |- | ||
+ | | TP138 | ||
+ | | LDB12 | ||
+ | | LB12 | ||
+ | | | ||
+ | | bottom LCD B.bit2 | ||
+ | |- | ||
+ | | TP139 | ||
+ | | LDB13 | ||
+ | | LB13 | ||
+ | | | ||
+ | | bottom LCD B.bit3 | ||
+ | |- | ||
+ | | TP140 | ||
+ | | LDB14 | ||
+ | | LB14 | ||
+ | | | ||
+ | | bottom LCD B.bit4 | ||
+ | |- | ||
+ | | TP141 | ||
+ | | LDB15 | ||
+ | | LB15 | ||
+ | | | ||
+ | | bottom LCD B.bit5 | ||
+ | |- | ||
+ | | TP142 | ||
+ | | INI | ||
+ | | | ||
+ | | ? | ||
+ | | LCD controller ? | ||
+ | |- | ||
+ | | TP143 | ||
+ | | GSP | ||
+ | | | ||
+ | | | ||
+ | | LCD controller Vsync? | ||
+ | |- | ||
+ | | TP144 | ||
+ | | GCK | ||
+ | | | ||
+ | | ? | ||
+ | | LCD controller ? | ||
+ | |- | ||
+ | | TP145 | ||
+ | | REV | ||
+ | | | ||
+ | | | ||
+ | | LCD controller ? | ||
+ | |- | ||
+ | | TP146 | ||
+ | | LS | ||
+ | | | ||
+ | | | ||
+ | | LCD controller Hsync? | ||
+ | |- | ||
+ | | TP147 | ||
+ | | SPL | ||
+ | | | ||
+ | | | ||
+ | | LCD controller ? | ||
+ | |- | ||
+ | | TP148 | ||
+ | | DCLK | ||
+ | | DCK | ||
+ | | | ||
+ | | LCD controller dot clock | ||
+ | |- | ||
+ | | TP149 | ||
+ | | CAM_RST | ||
+ | | CM_RST | ||
+ | | 1V8? | ||
+ | | Camera reset signal | ||
+ | |- | ||
+ | | TP150 | ||
+ | | COM1 | ||
+ | | | ||
+ | | ? | ||
+ | | ? | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP151 doesn't exist) | ||
+ | |- | ||
+ | | TP152 | ||
+ | | CAM_D4 | ||
+ | | CM_D4 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA7, 270Ω) | ||
+ | |- | ||
+ | | TP153 | ||
+ | | HSYNC | ||
+ | | | ||
+ | | 1V8? | ||
+ | | Camera horizontal sync/blank (conn. thru R133, 0Ω) (Aptina MT9V133-D LINE_VALID, active-low) | ||
+ | |- | ||
+ | | TP154 | ||
+ | | CAM_D3 | ||
+ | | CM_D3 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA6, 270Ω) | ||
+ | |- | ||
+ | | TP155 | ||
+ | | VSYNC | ||
+ | | | ||
+ | | 1V8? | ||
+ | | Camera vertical sync/blank (conn. thru R132, 0Ω) (Aptina MT9V133-D FRAME_VALID, active-low) | ||
+ | |- | ||
+ | | TP156 | ||
+ | | CKI | ||
+ | | | ||
+ | | 1V8? | ||
+ | | Camera clock something? (Aptina MT9V133-D EXTCLK? PIXCLK?) | ||
+ | |- | ||
+ | | TP157 | ||
+ | | CAM_D2 | ||
+ | | CM_D2 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA6, 270Ω) | ||
+ | |- | ||
+ | | TP158 | ||
+ | | CAM_D7 | ||
+ | | CM_D7 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA7, 270Ω) | ||
+ | |- | ||
+ | | TP159 | ||
+ | | CAM_D1 | ||
+ | | CM_D1 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA6, 270Ω) | ||
+ | |- | ||
+ | | TP160 | ||
+ | | X+ | ||
+ | | | ||
+ | | ? | ||
+ | | touchscreen | ||
+ | |- | ||
+ | | TP161 | ||
+ | | Y+ | ||
+ | | | ||
+ | | ? | ||
+ | | touchscreen | ||
+ | |- | ||
+ | | TP162 | ||
+ | | X- | ||
+ | | | ||
+ | | ? | ||
+ | | touchscreen, same net as Y- | ||
+ | |- | ||
+ | | TP163 | ||
+ | | Y- | ||
+ | | | ||
+ | | ? | ||
+ | | touchscreen, same net as X- | ||
+ | |- | ||
+ | | TP164 | ||
+ | | CAM_D6 | ||
+ | | CM_D6 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA7, 270Ω) | ||
+ | |- | ||
+ | | TP165 | ||
+ | | CAM_D0 | ||
+ | | CM_D0 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA6, 270Ω) | ||
+ | |- | ||
+ | | TP166 | ||
+ | | RCLK | ||
+ | | RCK | ||
+ | | 1V8? | ||
+ | | Camera (conn. thru R100, 100Ω) (Aptina MT9V133-D EXTCLK? PIXCLK?) | ||
+ | |- | ||
+ | | TP167 | ||
+ | | CAM_D5 | ||
+ | | CM_D5 | ||
+ | | 1V8? | ||
+ | | Camera parallell port (conn. thru RA7, 270Ω) | ||
+ | |- | ||
+ | | TP168 | ||
+ | | VDD28 | ||
+ | | V28 | ||
+ | | 2.8V power rail | ||
+ | | Only used by the camera. Generated by an LDO (U12) from VDD33 (Aptina MT9V133-D analog power rail?) | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP169 doesn't exist) | ||
+ | |- | ||
+ | | TP170 | ||
+ | | CAM_LED | ||
+ | | CM_LED | ||
+ | | Camera LED cathode? | ||
+ | | Connected through Q13 and R68 to BPTWL. | ||
+ | |- | ||
+ | | TP171 | ||
+ | | RTC_INT | ||
+ | | RC_INT | ||
+ | | 1V8? | ||
+ | | RTC->CPU-TWL interrupt | ||
+ | |- | ||
+ | | TP172 | ||
+ | | SD10_CLK | ||
+ | | S10_CK | ||
+ | | 3V3 | ||
+ | | SD card | ||
+ | |- | ||
+ | | TP173 | ||
+ | | SD10_DATA0 | ||
+ | | S10_D0 | ||
+ | | 3V3 | ||
+ | | SD card | ||
+ | |- | ||
+ | | TP174 | ||
+ | | SD10_DATA1 | ||
+ | | S10_D1 | ||
+ | | 3V3 | ||
+ | | SD card | ||
+ | |- | ||
+ | | TP175 | ||
+ | | SD10_DATA2 | ||
+ | | S10_D2 | ||
| 3V3 | | 3V3 | ||
− | | | + | | SD card |
+ | |- | ||
+ | | TP176 | ||
+ | | SD10_DATA3 | ||
+ | | S10_D3 | ||
+ | | 3V3 | ||
+ | | SD card | ||
+ | |- | ||
+ | | TP177 | ||
+ | | SD10_CMD | ||
+ | | S10_CD | ||
+ | | 3V3 | ||
+ | | SD card | ||
+ | |- | ||
+ | | TP178 | ||
+ | | SD10_CP | ||
+ | | S10_CP | ||
+ | | 3V3 | ||
+ | | SD card (card detect) | ||
+ | |- | ||
+ | | TP179 | ||
+ | | SD10_WP | ||
+ | | S10_WP | ||
+ | | 3V3 | ||
+ | | SD card write protect | ||
+ | |- | ||
+ | | TP180 | ||
+ | | GND | ||
+ | | GND | ||
+ | | ground | ||
+ | | | ||
+ | |- | ||
+ | ! scope="row" colspan="5" | (TP181 doesn't exist) | ||
+ | |- | ||
+ | | TP182 | ||
+ | | SD10_VDD | ||
+ | | S10_V | ||
+ | | 3.3V power rail | ||
+ | | same net as VDD33 | ||
+ | |- | ||
+ | | TP183 | ||
+ | | AOUT | ||
+ | | | ||
+ | | | ||
+ | | charging/battery status ? | ||
+ | |- | ||
+ | | TP184 | ||
+ | | ADPO | ||
+ | | | ||
+ | | | ||
+ | | charging/battery status ? | ||
+ | |- | ||
+ | | TP185 | ||
+ | | SCL1 | ||
+ | | | ||
+ | | 3V3 | ||
+ | | BPTWL bus | ||
+ | |- | ||
+ | | TP186 | ||
+ | | SDA1 | ||
+ | | | ||
+ | | 3V3 | ||
+ | | BPTWL bus | ||
+ | |- | ||
+ | | TP187 | ||
+ | | SND_SDI | ||
+ | | SND_DI | ||
+ | | 1V8 | ||
+ | | I2S bus | ||
+ | |- | ||
+ | | TP188 | ||
+ | | SND_SDO | ||
+ | | SND_DO | ||
+ | | 1V8 | ||
+ | | I2S bus | ||
+ | |- | ||
+ | | TP189 | ||
+ | | SND_WS | ||
+ | | | ||
+ | | 1V8 | ||
+ | | I2S bus | ||
+ | |- | ||
+ | | TP190 | ||
+ | | SND_SCLK aka BCLK | ||
+ | | SND_BK | ||
+ | | 1V8 | ||
+ | | I2S bus | ||
+ | |- | ||
+ | | TP191 | ||
+ | | SND_MCLK | ||
+ | | SND_MK | ||
+ | | 1V8 | ||
+ | | Reference frequency for TSC | ||
+ | |- | ||
+ | | TP192 | ||
+ | | PWSWO | ||
+ | | PSWO | ||
+ | | 3V3? | ||
+ | | powerbutton "output" from PMIC to BPTWL? | ||
+ | |- | ||
+ | | TP193 | ||
+ | | TH | ||
+ | | | ||
+ | | ? | ||
+ | | battery internal temperature detector? | ||
+ | |- | ||
+ | | TP194 | ||
+ | | VSHD | ||
+ | | | ||
+ | | 5.0V power rail | ||
+ | | Same net as VDD5. For LCDs. | ||
|} | |} | ||
− | |||
− | |||
== UTL-SUB-01 testpoints == | == UTL-SUB-01 testpoints == | ||
Line 354: | Line 1,160: | ||
| Power supply for TP8/TP10 LEDs | | Power supply for TP8/TP10 LEDs | ||
|} | |} | ||
+ | |||
+ | == P16 pinout == | ||
+ | |||
+ | The P16 pinout changed from [https://problemkaputt.de/gbatek-aux-dsi-internal-connectors.htm what it was on the regular DSi]. Some nets are now found in P24 instead (see below). | ||
+ | |||
+ | {| class="wikitable" border="1" | ||
+ | |- | ||
+ | ! name | ||
+ | ! pin no | ||
+ | ! pin no | ||
+ | ! name | ||
+ | |- | ||
+ | | GND | ||
+ | | 1 | ||
+ | | 2 | ||
+ | | GND | ||
+ | |- | ||
+ | | GND | ||
+ | | 3 | ||
+ | | 4 | ||
+ | | GND | ||
+ | |- | ||
+ | | GND | ||
+ | | 5 | ||
+ | | 6 | ||
+ | | GND | ||
+ | |- | ||
+ | | SD10_CLK | ||
+ | | 7 | ||
+ | | 8 | ||
+ | | GND | ||
+ | |- | ||
+ | | VDD33 | ||
+ | | 9 | ||
+ | | 10 | ||
+ | | SD10_D0 | ||
+ | |- | ||
+ | | VDD33 | ||
+ | | 11 | ||
+ | | 12 | ||
+ | | SD10_D1 | ||
+ | |- | ||
+ | | GND | ||
+ | | 13 | ||
+ | | 14 | ||
+ | | SD10_WP | ||
+ | |- | ||
+ | | SD10_CMD | ||
+ | | 15 | ||
+ | | 16 | ||
+ | | VDD33 | ||
+ | |- | ||
+ | | GND | ||
+ | | 17 | ||
+ | | 18 | ||
+ | | P08 | ||
+ | |- | ||
+ | | SD10_D3 | ||
+ | | 19 | ||
+ | | 20 | ||
+ | | VDD33 | ||
+ | |- | ||
+ | | SD10_D2 | ||
+ | | 21 | ||
+ | | 22 | ||
+ | | SD10_CD | ||
+ | |- | ||
+ | | GND | ||
+ | | 23 | ||
+ | | 24 | ||
+ | | GND | ||
+ | |- | ||
+ | | GND | ||
+ | | 25 | ||
+ | | 26 | ||
+ | | GND | ||
+ | |} | ||
+ | |||
+ | == P24 pinout == | ||
+ | |||
+ | P24 is a mezzanine connector for the VOLP/VOLN buttons and the shoulder L button (which were on P16 on the DSi). | ||
+ | |||
+ | {| class="wikitable" border="1" | ||
+ | |- | ||
+ | ! name | ||
+ | ! pin no | ||
+ | ! pin no | ||
+ | ! name | ||
+ | |- | ||
+ | | GND | ||
+ | | 1 | ||
+ | | 2 | ||
+ | | GND | ||
+ | |- | ||
+ | | N/C | ||
+ | | 3 | ||
+ | | 4 | ||
+ | | VOLP | ||
+ | |- | ||
+ | | P09 (shoulder-L) | ||
+ | | 5 | ||
+ | | 6 | ||
+ | | VOLN | ||
+ | |- | ||
+ | | GND | ||
+ | | 7-13 | ||
+ | | 8-14 | ||
+ | | GND | ||
+ | |} | ||
+ | |||
+ | [[Category:Hardware]] |
Latest revision as of 21:03, 1 December 2023
UTL-CPU-01 testpoints
number | name (TWL testpoint) | short name (some TWL PCBs) | voltage standard | comment |
---|---|---|---|---|
TP1 | EXTB+ | EXB+ | ? | |
TP2 | VIN | ≃5V DC | External charger power input | |
TP3 | Rosc | ? | ? | |
TP4 | RICHG | RCG | ? | Recharge? |
TP5 | GND | GND | ground | (near external charger connector) |
TP6 | VDD12 | V12 | 1.2V power rail | CPU-TWL core voltage |
TP7 | BT+ | battery + | at 2-pin power connector to UTL-SUB-01 | |
TP8 | VDET- | VDT- | ? | ? |
TP9 | DET | DT | ? | ? |
TP10 | VDD18 | V18 | 1.8V power rail | Various I/O and core voltage (incl. RTC) |
TP11 | ? | ? | something charging? | |
TP12 | VDD10 | V10 | 10V power rail | For LCDs |
TP13 | VDD33 | V33 | 3.3V power rail | Various I/O and core voltage |
TP14 | GND | GND | ground | (near PMIC) |
TP15 | B+ | ? | battery + ? | |
TP16 | VDD-5 | V-5 | -5V power rail | For LCDs |
TP17 | PVDD | PVD | ? | ? |
TP18 | VDD5 | V5 | 5.0V power rail | For LCDs |
TP19 | SG? | ? | ? | |
TP20 | BLA1 | BA1 | ? | backlight anode for lower screen |
TP21 | VDD42? | V42? | 4.2V? power rail (it's certainly a power rail) | generated from VDD5 using diode voltage drops? (to D6, C22, D3) |
TP22 | BLC1 | BC1 | ? | backlight cathode for lower screen |
TP23 | BLA2 | BA2 | ? | backlight anode for upper screen |
(TP24, TP25 don't exist) | ||||
TP26 | BLC2 | BC2 | ? | backlight cathode for upper screen |
(TP27 doesn't exist) | ||||
TP28 | MIC- | ground | same net as (analog) ground | |
TP29 | MIC+ | analog | Analog microphone-in signal | |
TP30 | SPRP | analog | positive signal for right built-in speaker | |
TP31 | SPRN | analog | negative signal for right built-in speaker | |
TP32 | SPLP | analog | positive signal for left built-in speaker | |
TP33 | SPLN | analog | negative signal for left built-in speaker | |
TP34 | GND | GND | ground | probably analog ground |
TP35 | SR | analog | headphone tip | |
TP36 | SL | analog | headphone ring | |
(TP37, TP38 don't exist) | ||||
TP39 | ORANGE | ORG | 3V3? 4V2? (at anode) | Orange LED charging indicator |
TP40 | BLUE | BLE | 3V3? 4V2? (at anode) | Blue LED power good indicator |
TP41 | RED | open collector (connected to LED cathode) | Red LED battery low indicator | |
TP42 | MC1_IO7 | M1_7 | 3V3 | MSB of gamecard parallell ROM *or* AUXSPI COPI signal |
TP43 | MC1_IO6 | M1_6 | 3V3 | 6th bit of gamecard parallell ROM *or* AUXSPI CIPO signal |
TP44 | MC1_VCC | M1_V | 3.3V power | power supply to gamecard (can be switched off by SoC) |
(TP45 doesn't exist) | ||||
TP46 | MC1_IO5 | M1_5 | 3V3 | |
TP47 | MC1_IO4 | M1_4 | 3V3 | |
TP48 | MC1_IO3 | M1_3 | 3V3 | |
TP49 | MC1_DET | M1_DT | 3V3 | Cartridge detected in slot (active-low) |
TP50 | MC1_IO2 | M1_2 | 3V3 | |
TP51 | MC1_IREQ | M1_IRQ | 3V3 | gamecart->SoC IRQ |
TP52 | MC1_IO1 | M1_1 | 3V3 | |
TP53 | MC1_RES | M1_RES | 3V3 | SoC->gamecart reset signal |
TP54 | MC1_IO0 | M1_0 | 3V3 | |
TP55 | MC1_CS | M1_CS | 3V3 | parallell ROM select (active-low) |
TP56 | MC1_CLK | M1_CLK | 3V3 | |
TP57 | MC1_CS2 | M1_CS2 | 3V3 | AUXSPI select (active-low) |
TP58 | /mRST | 3V3 | BPTWL reset (active-low) | |
TP59 | mFE | 3V3 | BPTWL flash enable (cf. 78K0/Kx2 Serial Flash Programming protocol, see NEC/Renesas docs) | |
TP60 | VOLP | VLP | 3V3 | volume + button (also RxD6 for 78K0 SFP. There's a series resistor to the physical button as protection against shorts) |
TP61 | VOLN | VLN | 3V3 | volume - button (also TxD6 for 78K0 SFP. There's a series resistor to the physical button as protection against shorts) |
TP62 | ATH_TX_H | A_T_H | 3V3 | AR6002 ANTD, "Control signal for shared antenna switch", probably enables Ath TX antenna |
TP63 | WL_TXPE | WL_T | 3V3 | Old Wifi TX enable? |
(TP64 doesn't exist) | ||||
TP65 | WL_RXPE | WL_R | 3V3 | Old Wifi RX enable? |
TP66 | /WIFI_RST | /WF_RST | 3V3 | New WiFi (Ath6k) reset (active-low) |
(TP67, TP68 don't exist) | ||||
TP69 | SPI_MOSI | 3V3 | SPI bus | |
(TP70 doesn't exist) | ||||
TP71 | SPI_MISO | 3V3 | SPI bus | |
(TP72 doesn't exist) | ||||
TP73 | SPI_SCK | SPI_SK | 3V3 | SPI bus |
(TP74, TP75 don't exist) | ||||
TP76 | SPI_CS1 | SPI_C1 | 3V3 | SPI chip select 1 (PMIC) |
(TP77 doesn't exist) | ||||
TP78 | SPI_CS3 | SPI_C3 | 3V3 | SPI chip select 3 (TSC) |
TP79 | SPI_CS2 | SPI_C2 | 3V3 | SPI chip select 2 (NVRAM) |
TP80 | SCL | 1V8 | CPU-TWL bus | |
(TP81 doesn't exist) | ||||
TP82 | SDA | 1V8 | CPU-TWL bus | |
TP83 | PENIRQ | PNIRQ | 1V8? 3V3? | touchscreen pen down |
TP84 | R7 | 1V8? | hinge magnet detect signal (active-low) | |
TP85 | RESET | RST | 3V3, but use as open drain/collector | CPU-TWL reset signal |
TP86 | P05 | 3V3? | dpad left button | |
TP87 | P04 | 3V3? | dpad right button | |
TP88 | P03 | 3V3? | start button | |
TP89 | P02 | 3V3? | select button | |
TP90 | P01 | 3V3? | B button | |
TP91 | P00 | 3V3? | A button | |
TP92 | PM_SLP | ? | ? | |
TP93 | VCNT5 | ? | ? | |
TP94 | GPIO330? | 330? | 3V3 | GPIO debug testpoint |
TP95 | R01 | ? | Y button | |
TP96 | R00 | ? | X button | |
TP97 | P09 | 3V3 | shoulder-L button | |
TP98 | P08 | 3V3 | shoulder-R button | |
TP99 | MUTE | 3V3 | ? (controlled by GPIO333 through U17) | |
TP100 | P07 | 3V3? | dpad down button | |
TP101 | HP#SP | H#S | 3V3 | audio out is headphones (1) or speakers (0). aka GPIO331 |
TP102 | P06 | 3V3? | dpad up button | |
(TP103 doesn't exist) | ||||
TP104 | /IRQ_O? | 3V3 | "powerbutton pressed" signal from the BPTWL to the CPU-TWL. aka GPIO332 | |
TP105 | LDR20 | LR20 | top LCD R.bit0 | |
TP106 | LDR21 | LR21 | top LCD R.bit1 | |
TP107 | LDR22 | LR22 | top LCD R.bit2 | |
TP108 | LDR23 | LR23 | top LCD R.bit3 | |
TP109 | LDR24 | LR24 | top LCD R.bit4 | |
TP110 | LDB21 | LB21 | top LCD B.bit1 | |
TP111 | LDG21 | LG21 | top LCD G.bit1 | |
TP112 | LDG22 | LG22 | top LCD G.bit2 | |
TP113 | LDG25 | LG25 | top LCD G.bit5 | |
TP114 | LDB20 | LB20 | top LCD B.bit0 | |
TP115 | LDB23 | LB23 | top LCD B.bit3 | |
TP116 | LDR11 | LR11 | bottom LCD R.bit1 | |
TP117 | LDR12 | LR12 | bottom LCD R.bit4 | |
TP118 | LDR15 | LR15 | bottom LCD R.bit5 | |
TP119 | LDR25 | LR25 | top LCD R.bit5 | |
TP120 | LDG20 | LG20 | top LCD G.bit2 | |
TP121 | LDG23 | LG23 | top LCD G.bit3 | |
TP122 | LDG24 | LG24 | top LCD G.bit4 | |
TP123 | LDB22 | LB22 | top LCD B.bit2 | |
TP124 | LDB24 | LB24 | top LCD B.bit4 | |
TP125 | LDB25 | LB25 | top LCD B.bit5 | |
TP126 | LDR10 | LR10 | bottom LCD R.bit0 | |
TP127 | LDR13 | LR13 | bottom LCD R.bit3 | |
TP128 | LDR14 | LR14 | bottom LCD R.bit4 | |
TP129 | LDG10 | LG10 | bottom LCD G.bit0 | |
TP130 | LDG11 | LG11 | bottom LCD G.bit1 | |
TP131 | LDG12 | LG12 | bottom LCD G.bit2 | |
TP132 | LDG13 | LG13 | bottom LCD G.bit3 | |
TP133 | LDG15 | LG15 | bottom LCD G.bit5 | |
TP134 | LDB11 | LB11 | bottom LCD B.bit1 | |
TP135 | LDG14 | LG14 | bottom LCD G.bit4 | |
TP136 | LDB10 | LB10 | bottom LCD B.bit0 | |
TP137 | COM2 | ? | ? | |
TP138 | LDB12 | LB12 | bottom LCD B.bit2 | |
TP139 | LDB13 | LB13 | bottom LCD B.bit3 | |
TP140 | LDB14 | LB14 | bottom LCD B.bit4 | |
TP141 | LDB15 | LB15 | bottom LCD B.bit5 | |
TP142 | INI | ? | LCD controller ? | |
TP143 | GSP | LCD controller Vsync? | ||
TP144 | GCK | ? | LCD controller ? | |
TP145 | REV | LCD controller ? | ||
TP146 | LS | LCD controller Hsync? | ||
TP147 | SPL | LCD controller ? | ||
TP148 | DCLK | DCK | LCD controller dot clock | |
TP149 | CAM_RST | CM_RST | 1V8? | Camera reset signal |
TP150 | COM1 | ? | ? | |
(TP151 doesn't exist) | ||||
TP152 | CAM_D4 | CM_D4 | 1V8? | Camera parallell port (conn. thru RA7, 270Ω) |
TP153 | HSYNC | 1V8? | Camera horizontal sync/blank (conn. thru R133, 0Ω) (Aptina MT9V133-D LINE_VALID, active-low) | |
TP154 | CAM_D3 | CM_D3 | 1V8? | Camera parallell port (conn. thru RA6, 270Ω) |
TP155 | VSYNC | 1V8? | Camera vertical sync/blank (conn. thru R132, 0Ω) (Aptina MT9V133-D FRAME_VALID, active-low) | |
TP156 | CKI | 1V8? | Camera clock something? (Aptina MT9V133-D EXTCLK? PIXCLK?) | |
TP157 | CAM_D2 | CM_D2 | 1V8? | Camera parallell port (conn. thru RA6, 270Ω) |
TP158 | CAM_D7 | CM_D7 | 1V8? | Camera parallell port (conn. thru RA7, 270Ω) |
TP159 | CAM_D1 | CM_D1 | 1V8? | Camera parallell port (conn. thru RA6, 270Ω) |
TP160 | X+ | ? | touchscreen | |
TP161 | Y+ | ? | touchscreen | |
TP162 | X- | ? | touchscreen, same net as Y- | |
TP163 | Y- | ? | touchscreen, same net as X- | |
TP164 | CAM_D6 | CM_D6 | 1V8? | Camera parallell port (conn. thru RA7, 270Ω) |
TP165 | CAM_D0 | CM_D0 | 1V8? | Camera parallell port (conn. thru RA6, 270Ω) |
TP166 | RCLK | RCK | 1V8? | Camera (conn. thru R100, 100Ω) (Aptina MT9V133-D EXTCLK? PIXCLK?) |
TP167 | CAM_D5 | CM_D5 | 1V8? | Camera parallell port (conn. thru RA7, 270Ω) |
TP168 | VDD28 | V28 | 2.8V power rail | Only used by the camera. Generated by an LDO (U12) from VDD33 (Aptina MT9V133-D analog power rail?) |
(TP169 doesn't exist) | ||||
TP170 | CAM_LED | CM_LED | Camera LED cathode? | Connected through Q13 and R68 to BPTWL. |
TP171 | RTC_INT | RC_INT | 1V8? | RTC->CPU-TWL interrupt |
TP172 | SD10_CLK | S10_CK | 3V3 | SD card |
TP173 | SD10_DATA0 | S10_D0 | 3V3 | SD card |
TP174 | SD10_DATA1 | S10_D1 | 3V3 | SD card |
TP175 | SD10_DATA2 | S10_D2 | 3V3 | SD card |
TP176 | SD10_DATA3 | S10_D3 | 3V3 | SD card |
TP177 | SD10_CMD | S10_CD | 3V3 | SD card |
TP178 | SD10_CP | S10_CP | 3V3 | SD card (card detect) |
TP179 | SD10_WP | S10_WP | 3V3 | SD card write protect |
TP180 | GND | GND | ground | |
(TP181 doesn't exist) | ||||
TP182 | SD10_VDD | S10_V | 3.3V power rail | same net as VDD33 |
TP183 | AOUT | charging/battery status ? | ||
TP184 | ADPO | charging/battery status ? | ||
TP185 | SCL1 | 3V3 | BPTWL bus | |
TP186 | SDA1 | 3V3 | BPTWL bus | |
TP187 | SND_SDI | SND_DI | 1V8 | I2S bus |
TP188 | SND_SDO | SND_DO | 1V8 | I2S bus |
TP189 | SND_WS | 1V8 | I2S bus | |
TP190 | SND_SCLK aka BCLK | SND_BK | 1V8 | I2S bus |
TP191 | SND_MCLK | SND_MK | 1V8 | Reference frequency for TSC |
TP192 | PWSWO | PSWO | 3V3? | powerbutton "output" from PMIC to BPTWL? |
TP193 | TH | ? | battery internal temperature detector? | |
TP194 | VSHD | 5.0V power rail | Same net as VDD5. For LCDs. |
UTL-SUB-01 testpoints
number | name (TWL testpoint) | voltage standard | comment |
---|---|---|---|
TP1 | ? | ? | to TH1 component |
TP2 | GND | (GND) | ground |
TP3 | P06 | 3V3? | D-pad up |
TP4 | P04 | 3V3? | D-pad right |
TP5 | P05 | 3V3? | D-pad left |
TP6 | P07 | 3V3? | D-pad down |
TP7 | PWSW | ? | raw powerbutton input (to PMIC and BPTWL) |
TP8 | RED | open collector (at cathode) | Battery low LED (DL1) |
TP9 | YELLOW | open collector (at cathode) | WiFi indicator LED (DL4) |
TP10 | BLUE | 3V3? 4V2? (at anode) | Power on/good LED (DL2) |
TP11 | ORANGE | 3V3? 4V2? (at anode) | Charging indicator (DL3) |
TP12 | VDD42 | 4.2V power supply | Power supply for TP8/TP10 LEDs |
P16 pinout
The P16 pinout changed from what it was on the regular DSi. Some nets are now found in P24 instead (see below).
name | pin no | pin no | name |
---|---|---|---|
GND | 1 | 2 | GND |
GND | 3 | 4 | GND |
GND | 5 | 6 | GND |
SD10_CLK | 7 | 8 | GND |
VDD33 | 9 | 10 | SD10_D0 |
VDD33 | 11 | 12 | SD10_D1 |
GND | 13 | 14 | SD10_WP |
SD10_CMD | 15 | 16 | VDD33 |
GND | 17 | 18 | P08 |
SD10_D3 | 19 | 20 | VDD33 |
SD10_D2 | 21 | 22 | SD10_CD |
GND | 23 | 24 | GND |
GND | 25 | 26 | GND |
P24 pinout
P24 is a mezzanine connector for the VOLP/VOLN buttons and the shoulder L button (which were on P16 on the DSi).
name | pin no | pin no | name |
---|---|---|---|
GND | 1 | 2 | GND |
N/C | 3 | 4 | VOLP |
P09 (shoulder-L) | 5 | 6 | VOLN |
GND | 7-13 | 8-14 | GND |