Difference between revisions of "NAND"
Jump to navigation
Jump to search
(page creation) |
(Add partition starts, note that diag area is blank straight from factory.) |
||
| Line 22: | Line 22: | ||
| 0x4E800 || ? || Unused (all 00) | | 0x4E800 || ? || Unused (all 00) | ||
|- | |- | ||
| − | | 0xffa00 || 0x400 || | + | | 0xffa00 || 0x400 || Diagnostic area. (often contains build date of device in plaintext) Blank in never-before-booted DSi. Might be written to during firmware updates. |
|- | |- | ||
| − | | 0x10ee00 || ? || | + | | 0x10ee00 || ? || First sector of main FAT32 partition |
| + | |- | ||
| + | | 0xcf09a00 || ? || First sector of photo FAT32 partition | ||
|} | |} | ||
Revision as of 21:15, 31 August 2009
The DSi uses a 256MB Samsung moviNAND flash chip, which is a NAND flash chip with a built-in controller that implements a MMC (SDIO) interface. In many ways, it's like an SD card in BGA packaging, and some people have successfully read it with modified SD card readers.
Addressing is done in terms of 512-bytes sectors. All wear-levelling and bad-block-mapping is handled transparently inside the chip by the controller. Most sectors are encrypted with a per-console key.
Layout:
| Offset | Size | Description |
|---|---|---|
| 0 | 0x200 | PC-style MBR, encrypted with a per-console key |
| 0x200 | 0x200 | Stage 2 info block 1 (see below) |
| 0x400 | 0x200 | Stage 2 info block 2 |
| 0x600 | 0x200 | Stage 2 info block 3 |
| 0x800 | 0x4DC00 | Stage 2 bootloader (encrypted with a universal key) |
| 0x4E400 | 0x400 | Stage 2 footer -- unknown format, but first 10 bytes are build number of Stage 2 bootloader |
| 0x4E800 | ? | Unused (all 00) |
| 0xffa00 | 0x400 | Diagnostic area. (often contains build date of device in plaintext) Blank in never-before-booted DSi. Might be written to during firmware updates. |
| 0x10ee00 | ? | First sector of main FAT32 partition |
| 0xcf09a00 | ? | First sector of photo FAT32 partition |